Home / Tesla Coils

Coil Run Log, 1998–2005

Photos and notes from coil runs in the backyard and beyond.

Tesla Coil Operations

May 7th, 2005

Ed Takes a ride in The Cage for his 70th birthday

October 19th, 2002

Firing my new secondary

September 23rd, 2000

Burning Plywood with arks shooting out the end

August 5th, 2000

Lash-up we used for running in DC charging mode

April 15th, 2000

Banjo Effect from Kevin Ottalini's DC coil

February 19th, 2000

My very first Flux Capacitor

February 11th, 2000

Alex Crow is visiting from England (he is with his uncle Ivan)

September 25th, 1999

Three coils arranged in a triangle and all firing at the same time

May 22nd, 1999

Scott, Ross, and I having an informal get together.

May 15th, 1999

Bill Wysock is showing us the famous Dick Aurandt coil (and lighting the BBQ with it's arcs)

April 24th, 1999

Ross' coil throwing some good arcs to the strike rail

February 20th, 1999

Ross and I meet in person for the first time

October 31st, 1998

Our first Tesla-Coil Halloween (we are now legendary in our town)

First Inside Run

This is the first time I ran my coil indoors (eventually blowing out the garage door opener)

First Run of my Coil

This is the first time my coil ever ran

First Outside Run

First Inside Run

First Inside Run and New Toroid

This is my very first indoor run.

After many more runs like this one the garage door opener finally blew up.

Oct 31, 1998

Setting up

Our plan was to have victims :') walk up the path, be distracted by my wife in a monster mask, then ZAP the sparks would fly. We placed the coil in the middle of this area which is sized at 2x the maximum spark length and placed grounded targets between the coil and the people for safety. We also placed a small bump on the toroid to help direct the sparks. In the dark the distances seemed much closer (especially when the sparks were flying).

Sparks

We scared a couple of grown men who jumped back and fell in the bushes, teenage girls squealed, and teenage boys were either terrified or amazed. We were told that the discharges could be heard half a mile away (there isn't much noise where we live). Often times the noise would startle the people then they would look and not quite comprehend what they were seeing.

Lots of strikes to the ground rod on the right. I'm sitting in the dark with Einstein hair and a lab coat on.

A very slight breeze caused the streamers to move as the ionized channel was blown away. This created a very interesting picture.

This is my view from behind the coil with the streamers shooting towards the little devils...

Ross and Brian

Mini Teslathon

Ross and his coil

Ross Overstreet has a very well built 6.5" coil. It traveled well and performed good no matter what we changed. Ross has a Web page at http://www.geocities.com/CapeCanaveral/Cockpit/3377/

Me and my coil

Here I am with my 6.5" coil and the experimental dual toroid (Had a lot of difficulty getting it to break out).

Mad Scientists

Here we are in my driveway. Both coils set up and ready to run. The neighbors couldn't believe there were now TWO coils in my driveway.

We sure made a lot of noise and had a great time.

Sparks from My Coil

Both Coils Running Together

It was quite fun to run both coils at once. Before the run we speculated on what would/could happen, AC power requirements, etc. We'd like to run them together again and move the coils closed together :)

At this point in the evening we had done a lot of changes. Ross had my toroid on his coil and I was experimenting with a dual toroid design. Neither system was optimized but the "fun factor" had taken over and sparks were flying.

(Sorry about the picture quality but in the excitement of running both coils at once I bumped the aperture setting on the camera).

04/24/99

Ross Overstreet and I had another get together at my house on Saturday April 24th.

We checked secondary frequencies, ate dinner, ran coils, made lots of sparks and noise, and generally had a great time...

Click on the pictures to see more detail...

Ross Overstreet's coil (which travels and works great).

My coil in action...

A crazy guy with a screwdriver in his hand (Won't say who it is but his initials are R.O.)...

Both coils running at the same time...

The whole crew (left ot right)...

Brian (me), Willian Pandy, Jeff Walker, Ross Overstreet

Bill Wysock's

I was invited to witness the running of the historical Dick Aurandt coil which was built in 1939. For more information on this coil see Bill Wysock's page at www.ttr.com.

The event took place in Bill Wysock's high voltage test facility (aka "His back yard"). We had a great time, the people were wonderful, and the food was great.

Unfortunately my camera died during the setup of the coil (mechanical problem) so I only got a few shots.

This is the base of the unit which incorporates a unique rotary gap, using a synchronous motor, with 5 fixed electrodes and four rotating electrodes.

Continuing to assemble the coil. Bill has the primary in his hand.

Bill is telling us the story of the coil and how he came to know Dick Aurandt.

The secondary is over-wrapped with twine for protection. This gave it a brown appearance.

May 22, 1999

Scott Hanson and Ross Overstreet brought their coils up to my house for a small get together on Saturday May 22nd, 1999. We had three coils running and about 15 spectators (not counting the neighbors looking out the windows).

As a grand fanilly we ran all three coils at once and it was spectacular.

A few hours after we were done there was a hugh lightning storm. People wanted to know if we had caused it and I couldn't resist taking credit :')

Here we are in my driveway (ready to rock and roll). Scott is on the left, Ross is in the center, and I'm on the right.

Scotts coil in action.

Ross' coil throwing sparks.

My coil doing it's thing. Note the lightbulb glowing on top of the toroid and the streamers connecting to the strike rail.

Later, with encouragement from the crowd (I think they wanted to see the magic smoke) I acheived a record length of 73" to a grounded rod.

Sep 25, 1999

Ross and I had another one of our Saturday night get together. This evening we had three coils including Alan Yang's which he recently completed.

The picture on the left shows Alan's secondary as it starts on fire (there is a jet of flame shooting out of it). The picture on the right shows the jet of flame as it really gets going (The flame is so bright it's lighting up the primary). In typical "go-for-broke" fashion, Alan ran until he lost a cap then he reconfigured and ran some more (not worrying about the small fire).

Free fire zone !!!

It's really a blast to all run at the same time (note: The coils are 6' apart and configured in a triangle). Most times all three coils would have connected streamers. Ross and I often shared an arc channel and Alan's secondary was an occasional target for strikes from my coil (no it didn't cause his flame out).

Ross hammers his strike rail.

I send one 6' to the ground (avoiding my strike rail - weird).

Ross was wondering where his Diet Coke went. I think I found it (see inside the green circle).

Oct 31, 1999

Jan 22, 2000

Commentary and Pictures from January 22nd, 2000

(All pictures are clickable for a larger view)

On Saturday January 22, 2000 Ross Overstreet and I had another one of our informal get togethers at my house. A lot of things went great and we tore up some equipment in the process (We both chalked it up to experience and a heck of a good time).

We started out the day with pulse discharge "Quarter Shrinker" experiments utilizing a lot of our Tesla coil equipment. We were all surprised by the amount of energy released on the first shot. This surprise gave us a very healthy respect for the safety aspects needed (There are NO second chances with this stuff). The energy released quickly turned plywood, 1" acrylic, and aluminum plate into a tangled splintered mess destroying the Trigatron mounting base. The only thing that held up was the 1/4" boiler-plate containment which was strapped down over the work coil. Ross will be posting pictures and more information on his web page. Here is a picture of Ross' quarter.

It was getting dark so we went on to run our coils. During the first run of the evening with both coils firing Ross called out. When I looked there was corona all over his power controller and a 2" arc jumping between a connector and a metal switch. We shut down and assessed the damage indicator light and fried dead-man switch. These were easily removed from the circuit (snip, snip). We then went looking for the culprit. Turns out we had connected the ground between the two coils but had neglected to hook them to the ground rod. Ross' power controller was the path the RF decided to use. After connecting the ground things went well although his power controller never was quite the same. Every once in a while the magic smoke would try and escape but when we opened the box there was no indication of a problem.

Ross is now using a single 15/60NST which has been de-potted and hot-rodded (shunts removed).

For more pictures and information go to http://users.better.org/roverstreet/components/psu.html His coil ran great and he was able to consistently produce 4 and 5-foot white hot arcs. Ross' coil dropped a couple hundred pounds since he removed the stack of NST's and went to EMMC's instead of the rolled-poly caps.

My coil recently underwent a complete primary circuit rebuild. I pulled the rolled-poly caps and installed the new EMMC's. I also got the bugs worked out of the SRSG and cleaned up the primary wiring. With all these changes my coil now performs GREAT!!! Consistent 6-foot white hot arcs with occasional 7'-foot ones to the concrete driveway. The sound of a sync coil is awesome but hard to explain.

We then went on to test a concept for a prop I'm building. It's called "The Bird-Cage" and will be 5' tall and hold a person inside. We had prepared a wire mesh mock-up which we placed between our two coils. We did a short run and decided the cage should be hooked to the RF ground (there is no bottom on the mock-up and corona was visible all around the circumference). After another test with the cage grounded Ross got inside. We started with low power tests and worked up to simultaneous 4'-5' power arcs from both coils. The cage worked so good that by the end of the evening a majority of the onlookers had gone for a ride. Many rolls of film were taken and both still and video was shot from inside the cage. The view is absolutely unbelievable. We never get to see arcs from this angle and there were a lot of strange things going on. The arc channel looked like a thorny rose stem with little spikes shooting out all along it's length. Video cameras inside the cage worked without a flaw and hopefully some of the still pictures will come out.

Ross Overstreet is in the left photo, Bruce Basura (my brother) is in the middle, and Howard Boardman (a colleague from England) is on the right.

That is my father (Mike Basura) in the left photo and Debbie Finger in the right photo.

This is what it looked like from inside the "Bird-Cage". Five and six foot power-arcs hitting inches from your face. Yet inside the cage video and still cameras functioned without a glitch.

The last thing we decided to do was shrink one last quarter for the crowd that gathered. The shot went off without a problem. Then as we were about to safe the capacitor there was a big and continuos arc from inside Ross' power controller (sounded like elf's were arc welding inside). This went on till the mains breaker tripped. We decided we had enough fun for one night and packed it in.

It was a great night although we will have to see how much damage was done to Ross' controller (he's been talking about rebuilding and now he has the opportunity to do so).

:')

Feb 11, 2000

Alex Crow (from England) visited me on a rainy Friday night in February.

Here is a picture of Alex and his uncle Ivan.

We played with the mini-twin, prototype bird-cage, and finally my 6" coil. Less than 15 seconds into the first run disaster struck. The wind was really blowing and the skirt blew into the SRSG. This crashed the SRSG breaking off all the flying electrodes. : (

Luckily, I've been working on a new high power static gap.

A bit of reconfiguration and the coil was screaming. The ground strikes are 7' long and the output was spectacular.

Feb 19, 2000

One of my very creative friends (Jerry Crawford) gave me a Tesla Coil Flux Capacator for my birthday.

This is the box it came in.

Here is the Flux Capacator. Note the external Flux Exciter, internal Flux Booster, and quick connectors.

He also gave me A spare Flux Booster and a spare Flux Exciter.

And no Flux Capacitor would be complete without directions.

For those of you who are wondering, It's a gag gift!

April 15, 2000

These were all taken by Kevin Ottalini with his old Minolta SRT101 SLR, totally manual,

55mm F1.7 lens. The shots were all in the 5 to 10 second range (live shots)

with Kodak ASA400 print film at about an F4.5 setting.

Aug 05, 2000

Ross and I got together to do full power tests of a DC conversion I've been working on. We also tested his new camera, trying various configurations to get the best arc pictures.

Al these shots were taken with Ross' new Olympus C3000z in manual mode. The best exposures were f2.8 at 1/4 to 1/2 a second. It was very important to add additional light for the arc pictures to come out (weird but additional lighting made the arcs show up better). For lighting we used a pair of 40w reflector bulbs in lighting cans I made. The bulbs were run at 40 to 60% of their rated voltage.

Sep 23, 2000

Sylvia Perez and Larry Margul came over to see my 6" coil run. Here's some of the fun things we did.

Frying a light bulb!

Shooting arcs from a new sphere I added to the topload!

Lighting a florescent tube the hard way!

Burning plywood!

Larry then Sylvia had a go in the "Cage of Death".

Oct 19, 2002

Ross Overstreet taking portable coiling to a new level.

Leaning back ready for those Big arcs.

Dejected after trying and trying to make it work with no success.

Running my coil with the new higher inductance and longer secondary.

Taking a hit to the pole pig (which is 7' from the coil). Notice the arc hits the HV insulator then leaves it headed for the ground.

Cranking out some great ground strikes.

The wife was away so it was time to burn something. Now where did I leave that Toshiba laptop :-)

This is the ultimate in environmental testing of a laptop.

The final results after another fun filled evening...

May 7, 2005

Claudia's father, Ed, celebrated his 70th birthday so we took him out for dinner

then for desert we put him in a cage and hit it with 500,000 volts of electricity.

Streamers showing the "Banjo" effect as they hit the cage right in front of Ed's face and rise from the heat.

Ross plays "Light Saber" in the background.

Claudia's sister Michiko takes a turn in the cage.